Fluid Bed Multi Technology – With Spray System

Fluid Bed Multi Technology provide processing flexibility for the production of granules & coating of powders and pellets. Top spray / Dryer insert for granulation & drying and Wurster for particle coating & pallet coating.
The basic machine is with two different processing insert:
⦁ Top Spray / Dryer Insert
⦁ Wurster Insert ( Bottom Spray )

MODEL: 2 to 150 kgs

Salient Features:

⦁ cGMP compliant construction
⦁ 2-bar pressure resistance construction
⦁ All contact parts made of SS316 stainless steel
⦁ Flameproof motors
⦁ Mirror finish inside and matte finish outside for contact parts
⦁ Relative humidity transmitter at the Air Handling Unit (AHU)
⦁ Temperature sensors for inlet, outlet, and product bed
⦁ Differential pressure transmitters for filter bags and gauges for HEPA filters at AHU
⦁ AC frequency drives for all motors
⦁ Sampling port at the product container
⦁ Quick opening system for container sieves
⦁ Clean-In-Place (CIP) port and nozzles
⦁ Material charging ports suitable for gravity and vacuum
⦁ PLC-based power panel with touch screen operating panel for automated controls
⦁ Wash water drain port with valve at the inlet plenum
⦁ All silicone rubber gaskets
⦁ Light and sight glasses with Tri-Clamp (T/C) clamp facility
⦁ Pneumatic inflatable gaskets at specified locations (bottom and top of the product container, top of the expansion chamber, and for air discharge bag sealing)

Technical Specifications:

Inlet air handling unit	AHU or APU
Inlet duct with butterfly valve	06 meters, standard length
Inlet air plenum	With pneumatic gaskets and wash water drain port and ports for nozzle inserts.
Processing inserts	(A) Top Spray / Dryer Insert (B) Wurster Insert.
Filter bag chamber with filter	2 nos. side supports
Available with	– Expansions chamber – Filter cleaning system – Outlet air duct – Exhaust air blower assembly with motor – Control Panel, Operating panel and Pneumatic Panel – Solution spray system with solution preparation vessel, Peristaltic Pump, spray nozzle & silicon tubing

* Depending upon the tooling size, shape and material characteristics
Note: We reserve right to change specifications without any prior notice.

Fluid Bed Multi Technology (R & D MODEL)

Salient Features:

2 bar pressure resistance construction
All contact parts made of SS316 stainless steel
Flameproof motors
Mirror finish inside and matte finish outside for contact parts
Relative humidity transmitter at the Air Handling Unit (AHU)
Temperature sensors for inlet, outlet, and product bed
Differential pressure transmitters for filter bags and gauges for HEPA filters at AHU
AC frequency drives for all motors
Sampling port at the product container
Quick opening system for container sieves
Clean-In-Place (CIP) port and nozzles
Material charging ports suitable for gravity and vacuum
PLC-based power panel with touch screen operating panel for automated controls
Wash water drain port with valve at the inlet plenum
All silicone rubber gaskets
Light and sight glasses with Tri-Clamp (T/C) clamp facility
Pneumatic inflatable gaskets at specified locations (bottom and top of the product container, top of the expansion chamber, and for air discharge bag sealing)
cGMP compliant construction

Optional / Additional Features:

Dew Point Sensor at inlet air duct, instead of Rh sensor at AHU.
Velocity Trans-meter for CFM measurement.
Differential Trans-meter instead differential pressure gauge at AHU and
Differential Pressure Trans – Meter for container sieve.
Jacketed Vessel instead of non jacketed. (for Solution Preparation.).
Flameproof Motor & Flameproof enclosure for panel for Solution Preparation Vessel.
Wet Scrubber at exhaust air.
Steam & Chilled Water Controlling Valve.
Peristaltic Pump of Master Flex-USA make instead of Indian make.
Flow Meter at Solution Spray System. [ Emersion make ( USA ) – Coriolis Type.]
Flameproof/Weatherproof Enclosure for Touch Screen.
Additional Duct per 1 Meter – Non insulated / Insulated.
Solid flow monitoring system.
Reduce capacity bowl for top spray & bottom spray.

Fluid Bed Multi Technology – With Spray System